Loki E3 Hawle m. Suðuendum DN65/D75 PN10

This resilient seated valve has PE tails screwed and sealed into the sockets
High performance sealing of the PE tails within the sockets is assured by two separate seals and a support liner
The valve can be connected to the PE pipeline by either butt fusion or electrofusion

Hawle E3:

Double bayonet O-ring carrier is connecting the spindle to the bonnet, allowing a fully encased, uniform epoxy powder coated bonnet for further improved corrosion protection
Wedge guide made of wear resistant POM material in load optimized design minimizes attrition and ensures lowest torque actuation
Wedge is flexible and fully linked in vulcanized elastomer to the wedge nut. This snug fit dampens vibration during opening and closing of the wedge
Wedge nut has a long thread length allowing significantly higher torques than the standard before breaking
O-rings, lip-seals mounted in the bonnet are replaceable under operating pressure
Extended edge protection to avoid damages during transport, storage and assembly
Sliding disks and ball bearing assure low friction performance of the spindle
100% suitable for buried installations
Suitable for cleaning with a cleaning pig
One extension spindle for several dimensions
Suitable for operation by automatic actuators
Easy refitting for position indicator and automatic actuators on the standard bonnet (DN 50 to DN 200)
To set-up an actuator or a position indicator, remove the centering flange and insert position indicator or actuator with adapter (DN 250 bis DN 400)

Staðlar

Resilient seated gate valve according to EN 1171, EN 1074-1 and EN 1074-2 with smooth, straight-through bore
Resilient seated gate valve with PE fusion tails in combination with PE pipes according to EN 12201, DIN 8074 - PN10 / SDR17

Eiginleikar